LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Mechanical - 3.6L - 2 Of 5) >> Off-Vehicle Repair Instructions (1 Of 4) >> Engine Flywheel Removal

Engine Flywheel Removal

WARNING: This page is about a different variant/trim than selected.
Tools Required

EN 46106  Flywheel Holding Tool. See Special Tools

    Fig 1: Identifying Engine Flywheel Bolts
    GM1395957Courtesy of GENERAL MOTORS CORP.
  1. Remove the engine flywheel bolts and discard.
  2. Remove the engine flywheel from the crankshaft.
    3. Fig 2: View Of Tool EN 46106
    GM945978Courtesy of GENERAL MOTORS CORP.
  3. Remove the EN 46106  . See Special Tools .
scientia non olet · About LEMON Manuals