LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Seat Hardware, Seat Trim And Upholstery) >> Repair Instructions >> Rear Seat Cushion Cover Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Trim Retainer Rings & Rear Seat Cushion Cover
    GM325072Courtesy of GENERAL MOTORS CORP.
  1. Remove the rear seat cushion (1). Refer to Rear Seat Cushion Replacement .
  2. Remove the trim retainer rings (3) (hog rings) from the cover (2).
  3. Slide your hand between the rear seat cushion pad and the rear seat cover and separate the hook and loop retainers that attach the rear seat cushion cover to the rear seat pad.
  4. Remove the rear seat cushion cover from the pad.
scientia non olet · About LEMON Manuals