LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Seat Hardware, Seat Trim And Upholstery) >> Repair Instructions >> Rear Seat Cushion Cover Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Trim Retainer Rings & Rear Seat Cushion Cover
    GM325072Courtesy of GENERAL MOTORS CORP.
  1. Install the rear seat cushion cover (2) to the pad.
  2. Install the hook and loop retainers that attach the seat cushion cover to the pad.
  3. Install the trim retainer rings (3) (hog rings) to the rear seat cushion cover.
  4. Install the rear seat cushion (1). Refer to Rear Seat Cushion Replacement .
scientia non olet · About LEMON Manuals