LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Seat Hardware, Seat Trim And Upholstery) >> Repair Instructions >> Rear Seat Back Sound Barrier Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement .
  2. Remove the rear seat back. Refer to Rear Seat Back Replacement (Folding)  or Rear Seat Back Replacement (Non-folding) .
  3. On stationary seat back models, remove the child seat belt bracket. Refer to Child Restraint Tether Anchor Replacement .
  4. Remove the rear window trim panel. Refer to Rear Window Shelf Trim Panel Replacement .
  5. Remove the upper quarter trim panel. Refer to Rear Quarter Upper Trim Panel Replacement .
  6. Remove the lower quarter trim panel. Refer to Rear Quarter Lower Trim Panel Replacement .
  7. On the split rear seat, remove the push-in retainers holding the rear compartment trim. Move the trim into the rear compartment.
    8. Fig 1: Identifying Sound Barrier
    GM1283327Courtesy of GENERAL MOTORS CORP.
  8. Remove the sound barrier.
scientia non olet · About LEMON Manuals