LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Seat Hardware, Seat Trim And Upholstery) >> Repair Instructions >> Rear Seat Back Sound Barrier Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Sound Barrier
    GM1283327Courtesy of GENERAL MOTORS CORP.
  1. Install the sound barrier.
  2. Reposition the rear compartment trim and install the push in retainers.
  3. Install the rear window trim panel. Refer to Rear Window Shelf Trim Panel Replacement .
  4. Install the upper quarter trim panel. Refer to Rear Quarter Upper Trim Panel Replacement .
  5. Install the lower quarter trim panel. Refer to Rear Quarter Lower Trim Panel Replacement .
  6. On stationary seat back models, install the child seat belt bracket. Refer to Child Restraint Tether Anchor Replacement .
  7. Install the rear seat back. Refer to Rear Seat Back Replacement (Folding)  or Rear Seat Back Replacement (Non-folding) .
  8. Install the rear seat cushion. Refer to Rear Seat Cushion Replacement .
scientia non olet · About LEMON Manuals