LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 85 (Wiring Systems And Power Management - Diagnostic Starting Point & Splice Pack And Inline Harness Connector End Views) >> Inline Harness Connector End Views >> X125 Engine Harness to Knock Sensor Jumper Harness (L26)

X125 Engine Harness to Knock Sensor Jumper Harness (L26)

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
GM696940Courtesy of GENERAL MOTORS CORP.
GM696937Courtesy of GENERAL MOTORS CORP.
Connector Part Information 
  • OEM: 12065172
  • Service: See Catalog
  • Description: 1-Way F Metri-Pack 280 Series Sealed (BK)
 Connector Part Information 
  • OEM: 12065171
  • Service: 12085669
  • Description: 1-Way M Metri-Pack 280 Series Sealed (BK)
Terminal Part Information 
  • Terminal/Tray: 12077411/2
  • Core/Insulation Crimp: 2/5
  • Release Tool/Test Probe: 12094430/J-35616-4A (PU)
 Terminal Part Information 
  • Terminal/Tray: See Terminal Repair Kit
  • Core/Insulation Crimp: See Terminal Repair Kit
  • Release Tool/Test Probe: See Terminal Repair Kit
X125 Engine Harness to Knock Sensor Jumper Harness (L26)

Pin Wire Circuit Function Pin Wire Circuit Function
A 0.35 L-BU 1876 Knock Sensor 2 Signal A 0.35 D-BU 1876 Knock Sensor 2 Signal
scientia non olet · About LEMON Manuals