X110 Engine Harness to Ignition Control Module (ICM) Wiring Harness (L26)

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS CORP.

Courtesy of GENERAL MOTORS CORP.

Connector Part Information OEM: 15326835 Service: 12117271 Description: 8-Way F GT 150 Sealed 4.0 (BK)	Connector Part Information OEM: 12047931 Service: 12117270 Description: 8-Way M Metri-Pack 150 Series Sealed (BK)
Terminal Part Information Pins: A-D, F-H Terminal/Tray: 12048074/2 Core/Insulation Crimp: E/1 Release Tool/Test Probe: 12094429/J-35616-2A (GY)	Terminal Part Information Terminal/Tray: See Terminal Repair Kit Core/Insulation Crimp: See Terminal Repair Kit Release Tool/Test Probe: See Terminal Repair Kit

X110 Engine Harness to Ignition Control Module (ICM) Wiring Harness (L26)

Pin	Wire	Circuit	Function	Pin	Wire	Circuit	Function
A	0.35 WH	423	IC Timing Control	A	0.35 WH	423	IC Timing Control
B	0.35 TN/BK	424	IC Timing Signal	B	0.35 TN/BK	424	IC Timing Signal
C	0.35 L-BU/BK	647	Medium Resolution Engine Speed Signal	C	0.35 L-BU/BK	647	Medium Resolution Engine Speed Signal
D	0.35 PU/WH	430	Low Resolution Engine Speed Signal	D	0.35 PU/WH	430	Low Resolution Engine Speed Signal
E	-	-	Not Used	E	0.35 WH	121	Engine Speed Signal
F	0.35 BK	630	Camshaft Position Signal	F	0.35 BK	630	Camshaft Position Signal
G	0.35 RD/BK	453	Low Reference	G	0.35 RD/BK	453	Low Reference
H	0.5 PK	239	Ignition 1 Voltage	H	0.8 PK	239	Ignition 1 Voltage