LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 83 (Engine Mechanical - 3.6L (5 Of 5)) >> Off-Vehicle Repair Instructions (3 Of 3) >> Drive Belt Tensioner Installation

Drive Belt Tensioner Installation

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Drive Belt Tensioner
    GM1864407Courtesy of GENERAL MOTORS CORP.
  1. Place the left drive belt tensioner assembly in position to the engine front cover.
    2. NOTE: Refer to Fastener Notice .
  2. Install the left drive belt tensioner bracket bolts.

    Tighten:  Tighten the left drive belt tensioner bracket bolts to 23 N.m (17 lb ft).

scientia non olet · About LEMON Manuals