LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Engine Mechanical - 3.6L (4 Of 5)) >> Off-Vehicle Repair Instructions (2 Of 3) >> Valve Spring Inspection and Measurement >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean the valve springs in solvent.
  2. CAUTION: Refer to Safety Glasses Caution .
  3. Dry the valve springs with compressed air.
  4. Inspect the valve springs for broken coils or coil ends.