LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Engine Mechanical - 3.6L (4 Of 5)) >> Off-Vehicle Repair Instructions (2 Of 3) >> Piston, Connecting Rod, and Bearing Cleaning and Inspection >> Cleaning Procedure

Cleaning Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    IMPORTANT: DO NOT wire brush any part of the piston.
  1. Clean the piston skirts and the pins with a cleaning solvent.
  2. Clean the piston ring grooves with a groove cleaner. Ensure that the oil ring holes and slots are clean.
    3. CAUTION: Refer to Safety Glasses Caution .
  3. Dry the piston with compressed air.
scientia non olet · About LEMON Manuals