LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (Engine Mechanical - 3.6L (3 Of 5)) >> Off-Vehicle Repair Instructions (1 Of 3) >> Valve Lifter Removal - Left Side

Valve Lifter Removal - Left Side

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Stationary Hydraulic Lash Adjuster (SHLA)
GM902901Courtesy of GENERAL MOTORS CORP.
IMPORTANT:
  • Do not stroke/cycle the stationary hydraulic lash adjuster plunger without oil in the lower pressure chamber.
  • Do not allow the stationary hydraulic lash adjuster to tip over, plunger down, after the oil fill.

Remove the valve lifters, stationary hydraulic lash adjuster, (SHLAs) from the left cylinder head.

scientia non olet · About LEMON Manuals