LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (Engine Mechanical - 3.6L (3 Of 5)) >> Off-Vehicle Repair Instructions (1 Of 3) >> Oil Level Indicator and Tube Removal

Oil Level Indicator and Tube Removal

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Oil Level Indicator & Tube
    GM1395941Courtesy of GENERAL MOTORS CORP.
  1. Remove the oil level indicator tube bracket bolt.
  2. Remove the oil level indicator and tube by sliding the tube out from the lower crankcase hole.
  3. Fig 2: View Of Oil Level Indicator Tube O-Ring
    GM1583980Courtesy of GENERAL MOTORS CORP.
  4. Remove and discard the O-ring from the oil level indicator tube if damaged.