LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (Seat Belt System) >> Repair Instructions >> Seat Belt Retractor Replacement - Right Front >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Seat Belt Retractor
    GM1277004Courtesy of GENERAL MOTORS CORP.
  1. Remove the upper center pillar trim. Refer to Center Pillar Upper Trim Panel Replacement .
  2. Remove the lower center pillar trim. Refer to Center Pillar Lower Trim Panel Replacement .
  3. Remove the guide loop nut.
  4. Remove the guide loop from the guide adjuster bracket.
  5. Remove the intermediate guide bolt.
  6. Remove the seat belt retractor bolt.
  7. Remove the seat belt retractor from the T-slot in the lower center pillar.
scientia non olet · About LEMON Manuals