LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (Seat Belt System) >> Repair Instructions >> Seat Belt Retractor Replacement - Left Front >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Seat Belt Guide Loop
    GM157282Courtesy of GENERAL MOTORS CORP.
  1. Open the seat belt guide loop cover.
  2. Remove the guide loop nut.
  3. Remove the guide loop from the guide adjuster bracket.
  4. Remove the lower center pillar trim. Refer to Center Pillar Lower Trim Panel Replacement .
    5. Fig 2: Locating Intermediate Guide Bolts
    GM371847Courtesy of GENERAL MOTORS CORP.
  5. Remove the intermediate guide bolts.
    6. Fig 3: Identifying Seat Belt Anchor Plate Nut
    GM370568Courtesy of GENERAL MOTORS CORP.
  6. Remove the anchor plate nut from the seat stud.
  7. Remove the anchor plate from the seat stud.
    8. Fig 4: View Of Seat Belt Retractor At Lower Center Pillar
    GM371832Courtesy of GENERAL MOTORS CORP.
  8. Remove the seat belt retractor bolt.
  9. Remove the seat belt retractor from the lower center pillar.
scientia non olet · About LEMON Manuals