LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (Seat Belt System) >> Repair Instructions >> Seat Belt Replacement - Center Front >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the seat belt to the front seat.
    2. Fig 1: Identifying Bolt Covers & Seat Belt Bolts
    GM1368298Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to FASTENER NOTICE .
  2. Install the center seat belt bolts.

    Tighten:  Tighten the seat belt retractor bolt to 42 N.m (31 lb ft).

  3. Install the bolt covers (3) on both sides of the seat.
  4. Install the front seat. Refer to Front Seat Replacement - Bucket .
scientia non olet · About LEMON Manuals