LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (Seat Belt System) >> Repair Instructions >> Child Restraint Tether Anchor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Child Restraint Tether Brackets
    GM604202Courtesy of GENERAL MOTORS CORP.

  1. Remove the rear shelf trim panel. Refer to Rear Window Shelf Trim Panel Replacement .

  2. Slide the sound barrier out from under the upper quarter panel trim.
  3. Pull the sound barrier forward to access the tether bolts.
  4. Remove the child seat tether bracket to rear shelf bolts.
  5. Remove the child seat tether brackets from the rear shelf.
scientia non olet · About LEMON Manuals