Wheel Weight Placement - Clip-on Weights
WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
When static balancing, locate the wheel balance weights on the inboard flange (2) if only 28 g (1 oz.) or less is called for. If more than 28 g (1 oz.) is called for, split the weights as equally as possible between the inboard (2) and outboard (1) flanges.
When dynamic balancing, locate the wheel balance weights on the inboard (2) and outboard (1) rim flanges at the positions specified by the wheel balancer.