LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Wiper System & Washer System) >> Repair Instructions >> Windshield Wiper Motor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the wiper drive system module. Refer to Windshield Wiper System Module Replacement .
  2. Fig 1: Locating Wiper Crank Arm & Nut
    GM1257438Courtesy of GENERAL MOTORS CORP.
  3. Remove the wiper crank arm nut (2) from the wiper motor shaft.
  4. Remove the wiper crank arm (1) from the wiper motor shaft.
  5. Fig 2: View Of Wiper Motor Screws
    GM815221Courtesy of GENERAL MOTORS CORP.
  6. Remove the wiper motor screws from the wiper motor.
  7. Remove the wiper motor from the wiper module.