LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Wiper System & Washer System) >> Repair Instructions >> Windshield Wiper Blade Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition ON.
  2. Turn the wiper switch to the DELAY position.
  3. Turn the ignition OFF when the windshield wipers are in the midwipe position.
    4. Fig 1: Identifying Wiper Arm To Wiper Blade
    GM815214Courtesy of GENERAL MOTORS CORP.
  4. Press the wiper blade clip button in to release the wiper blade from the inside radius of the wiper arm.
    5. Fig 2: View Of Wiper Arm Blade
    GM815213Courtesy of GENERAL MOTORS CORP.
  5. Remove the wiper arm out through the opening in the wiper blade.
scientia non olet · About LEMON Manuals