LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Wiper System & Washer System) >> Repair Instructions >> Windshield Wiper Blade Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Wiper Arm Blade
    GM815213Courtesy of GENERAL MOTORS CORP.
  1. Install the hook of the wiper arm through the opening in the wiper blade.
    2. Fig 2: Identifying Wiper Arm To Wiper Blade
    GM815214Courtesy of GENERAL MOTORS CORP.
  2. Position the wiper blade pivot in the inside radius of the wiper arm hook.
  3. Press the wiper blade pivot into the wiper arm hook until the pivot locks into the hook.
  4. Operate the windshield wipers and inspect for proper operation.
scientia non olet · About LEMON Manuals