LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Wiper System & Washer System) >> Repair Instructions >> Washer Pump Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Washer Pump Hose, Washer Pump Electrical Connector, & Washer Solvent Level Sensor
    GM815208Courtesy of GENERAL MOTORS CORP.
  1. Install the seal to the washer solvent container.
  2. Install the washer pump to the washer solvent container.
  3. Connect the washer pump electrical connector.
  4. Connect the washer pump hose.
  5. Install the right front fender liner. Refer to Front Fender Liner Replacement .
  6. Fill the washer solvent container with washer solvent.
  7. Close the hood.
scientia non olet · About LEMON Manuals