Conditions for Running the DTC
WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
- DTCs P0010, P0013, P0016, P0017, P0018, P0019, P0020, P0023, P0341, P0342, P0343, P0346, P0347, P0348, P0366, P0367, P0368, P0391, P0392, P0393, P2088, P2089, P2090, P2091, P2092, P2093, P2094, and P2095 are not set.
- The engine is operating for greater than 1 second.
- The ECM completed the CMP actuator solenoid output driver test.
- The engine speed is greater than 520 RPM.
- DTCs P1011, P1012, P1013, and P1014 only run once at engine start-up.