LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (Automatic Transaxle - 4T65-E - DTC P0218 To DTC P2534) >> DTC P0741, P0751, or P0756 >> Component Testing

Component Testing

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
  1. Perform the Shift Solenoid Leak Test .
    • If the solenoid fails the shift solenoid leak test, replace the affected solenoid.
  2. Disconnect the wiring harness connector from the affected solenoid. Measure the resistance for the affected solenoid. The resistance should be between 19 and 31 ohms for the 1-2 SS and the 2-3 SS. The resistance should be between 10 and 15 ohms for the TCC PWM solenoid.
    • If the resistance is not within the specified range, replace the affected solenoid.
scientia non olet · About LEMON Manuals