Circuit/System Testing
WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF. inspect the CMP sensor for correct installation.
- If the CMP sensor is loose, inspect the sensor and the O-ring for damage, and replace as necessary.
- Inspect the engine for the following conditions:
- Engine oil for debris
- Camshaft reluctor wheel for damage
- The timing chain, timing chain tensioner, and sprockets for wear or damage
- Repair or replace any worn or damaged components. Refer to Camshaft Timing Chain and Sprocket Cleaning and Inspection .