LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 65 (Engine Control System & Fuel System - 3.8L - DTC P0016 To DTC P0350) >> DTC P0131, P0132, P0137, or P0138 >> Typical Scan Tool Data

Typical Scan Tool Data

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
HO2S Sensor 1

HO2S Sensor Voltage Circuits Normal Range Short to Ground Open Short to Voltage
HO2S High Signal 0-1000 mV 0-45 mV Approximately 450 mV Approximately 1106 mV
HO2S Low Signal 0-1000 mV 0-1000 mV 0-800 mV 50-1106 mV
HO2S Sensor 2

HO2S Sensor Voltage Circuits Normal Range Short to Ground Open Short to Voltage
HO2S High Signal 0-1000 mV 0-45 mV Approximately 450 mV Approximately 1106 mV
HO2S Low Signal 0-1000 mV 0-1000 mV 400-600 mV 50-1106 mV