Typical Scan Tool Data
WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
TP Sensor
| Circuit | Short to Ground | Open | Short to Voltage |
|---|---|---|---|
| Operating Conditions:
The engine is operating in closed loop Parameter Normal Range: TP Position Sensor 5%/4.2 Volts |
|||
| 5-Volt Reference | 124%/0.0 Volts | 7%/0.0 Volts | 113%/TP 1 4.98, TP 2, 4.50 Volts |
| TP Sensor Signal 1 | 4%/0.00 Volts | 7%/0.00 Volts | 7%/0.00 Volts |
| TP Sensor Signal 2 | 4%/0.00 Volts | 4%/4.98 Volts | 27%/4.98 Volts |
| Low Reference | - | 0%/4.98 Volts | - |