LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Engine Control System & Fuel System - 3.6L - DTC P0008 To DTC P0333) >> DTC P0112 or P0113 >> Typical Scan Tool Data

Typical Scan Tool Data

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
IAT Sensor

Circuit Short to Ground Open Short to Voltage
Operating Conditions:  Engine operating in Closed Loop.
Parameter Normal Range:  -39° to +134°C (-38° to +274°F) Varies with ambient temperature.
IAT Sensor Signal 135°C (275°F) -40°C (-40°F) -40°C (-40°F)*
Low Reference - -40°C (-40°F) -40°C (-40°F)*
* Internal ECM or sensor damage may occur if the circuit is shorted to B+