LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Engine Control System & Fuel System - 3.6L - DTC P0008 To DTC P0333) >> DTC P0008 or P0009 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clear the DTCs with a scan tool.
  2. Engine idling, at normal operating temperature for 10 minutes, or until a DTC sets. Observe the scan tool DTC information, DTCs P0008 and P0009 should not set.
  3. Operate the vehicle within the conditions for running the DTC to verify the DTC does not reset. You may also operate the vehicle within the conditions that are captured in the Freeze Frame/Failure Records Data List.
scientia non olet · About LEMON Manuals