LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 63 (Seat Heating System & Seat Cooling System) >> Repair Instructions >> Driver Seat and Passenger Seat Back Cushion Heater Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front seat. Refer to Front Seat Replacement - Bucket .
    2. Fig 1: Locating Front Seat Back Heater Element & Electrical Connector
    GM1466651Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the electrical connector from the seat back cushion heater.
  3. Remove the seat back cover. Refer to Front Seat Back Cushion Cover Replacement .
  4. Gently pull on the heater element in order to remove the element from the seat back. Do NOT damage the seat back.
scientia non olet · About LEMON Manuals