LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 62 (Wiring Systems And Power Management - DTC B1370 To DTC B1475) >> DTC B1433 >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.

The DTC will set only when the module requests the output and there is a short to ground at BCM terminal 5, X1 or in the Run relay coil control circuit.