LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 62 (Wiring Systems And Power Management - DTC B1370 To DTC B1475) >> DTC B1433 >> Circuit/System Testing

Circuit/System Testing

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the X1 harness connector at the BCM.
  2. Verify there are not any aftermarket components wired into terminal 5.
  3. If terminal 5 is empty, clear the code as there are not any further circuits to diagnose.
scientia non olet · About LEMON Manuals