LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Engine Control System & Fuel System - 3.8L - Troubleshooting & Diagnosis) >> Evaporative Emission System Diagnosis >> Temperature Variation Instructions >> For Example >> The Solution

The Solution

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.

When working on a vehicle with significant temperature differences between the vehicle EVAP system and the nitrogen gas, allow the vehicle EVAP system temperature to stabilize as close as possible to the temperature of the nitrogen gas before conducting the Flowmeter Test.

scientia non olet · About LEMON Manuals