LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Interior Trim And Paneling) >> Repair Instructions >> Rear Quarter Upper Trim Panel Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Rear Quarter Upper Trim Panel
    GM1283311Courtesy of GENERAL MOTORS CORP.
  1. Remove the rear seat back. Refer to Rear Seat Back Replacement (Folding) or Rear Seat Back Replacement (Non-folding) .
  2. Remove the door weatherstrip from the pinch weld flange to expose the upper quarter trim panel.
  3. Remove the screw cover and screw in the top of the panel (1).
  4. Use J 38778  to disengage the push-in retainers and remove the trim panel.
scientia non olet · About LEMON Manuals