LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Interior Trim And Paneling) >> Repair Instructions >> Rear Floor Trim Plate Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Floor Trim Plate
    GM1283430Courtesy of GENERAL MOTORS CORP.
  1. Open the rear compartment.
  2. Remove the rear compartment sill plate. Refer to Rear Compartment Sill Trim Plate Replacement .
  3. Lift up on the center of the floor trim plate and remove either edge from the side panel.
  4. Remove the floor trim plate from the rear compartment.