LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Interior Trim And Paneling) >> Repair Instructions >> Rear Floor Trim Plate Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Floor Trim Plate
    GM1283430Courtesy of GENERAL MOTORS CORP.
  1. Position the floor trim plate into the rear compartment.
  2. Engage the sides of the floor trim plate, pressing the sides into place.
  3. Install the rear compartment sill plate. Refer to Rear Compartment Sill Trim Plate Replacement .
  4. Close the rear compartment.
scientia non olet · About LEMON Manuals