LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Interior Trim And Paneling) >> Repair Instructions >> Rear Compartment Front Trim Panel Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Front Trim Panel
    GM876798Courtesy of GENERAL MOTORS CORP.
  1. Position the front trim panel in the vehicle.
  2. Slide the panel under the 2 side panels.
  3. Install the push-in retainers in the rear compartment side trim panels.
  4. Install the rear seat back. Refer to Rear Seat Back Replacement (Folding) or Rear Seat Back Replacement (Non-folding) .