LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Interior Trim And Paneling) >> Repair Instructions >> Front Door Switch Bezel Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front door trim pad. Refer to Front Side Door Trim Panel Replacement .
    2. Fig 1: Identifying Window & Rearview Mirror Switches
    GM1350441Courtesy of GENERAL MOTORS CORP.
  2. Remove the window and rearview mirror switches.
    3. Fig 2: Identifying Bezel Clip & Bezel Screw
    GM1350411Courtesy of GENERAL MOTORS CORP.
  3. Remove the bezel clip (1).
  4. Remove the bezel screw (2).
    5. Fig 3: View Of Retaining Clips & Front Tab
    GM1350416Courtesy of GENERAL MOTORS CORP.
  5. Press the 2 retaining clips (1) together and push the rear of the bezel out through the door trim.
  6. Pull the bezel rearward to remove the front tab (2).
  7. Remove the bezel from the vehicle.
scientia non olet · About LEMON Manuals