LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Engine Control System & Fuel System - 5.3L - Troubleshooting & Diagnosis) >> Powertrain Relay Diagnosis >> Typical Scan Tool Data

Typical Scan Tool Data

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
EC Ignition Relay

Display Parameters Normal Range Short to Ground Open/High Resistance Short to Voltage
Operating Conditions:  Ignition ON, engine OFF, powertrain relay commanded ON.
EC Ignition Powertrain Relay Circuit Status OK/Incomplete Short to GRD/Open Short to GRD/Open Short to B+
EC Ignition Powertrain Relay Command ON ON ON ON
EC Ignition Powertrain Relay Feedback Signal 12-12.9 V 0.0 V 0.0 V 12-12.9 V