LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 56 (Immobilizer System) >> Diagnostic Information and Procedures >> DTC B2945 >> Circuit/System Description

Circuit/System Description

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.

When the ignition is switched to the ON position, the body control module (BCM) supplies 12 volts to the theft deterrent exciter module. The BCM also provides a low reference for the exciter. With the voltage supplied to the exciter, the transponder embedded in the head of the key is energized by the exciter coils surrounding the ignition lock cylinder. The energized transponder transmits a signal that contains its unique value, which is received by the BCM. The BCM then compares this value to a value stored in memory, learned key code. If the value received matches the stored value, the BCM sends the fuel enable password to the engine control module/powertrain control module (ECM/PCM) via serial data.