LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (Engine Control System & Fuel System - 5.3L - Introduction (2 Of 2)) >> Repair Instructions >> Power Brake Booster Vacuum Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Brake Booster Vacuum Sensor
    GM1488348Courtesy of GENERAL MOTORS CORP.
  1. Install the brake booster vacuum sensor grommet (2) to the booster.
  2. Install the brake booster vacuum sensor (1) to the booster.
    3. Fig 2: Identifying Brake Booster Vacuum Sensor Electrical Connector
    GM1618878Courtesy of GENERAL MOTORS CORP.
  3. Connect the brake booster vacuum sensor electrical connector.
scientia non olet · About LEMON Manuals