LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (Engine Control System & Fuel System - 5.3L - Introduction (2 Of 2)) >> Repair Instructions >> Fuel Tank Pressure Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Fuel Sender Assembly
    GM1575963Courtesy of GENERAL MOTORS CORP.
  1. Install the new fuel tank pressure sensor (1) to the fuel sender assembly.
  2. Install the fuel tank. Refer to Fuel Tank Replacement .
scientia non olet · About LEMON Manuals