Installation Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Fuel Level Sensor

Courtesy of GENERAL MOTORS CORP.

Slide the fuel level sensor (1) onto the bucket and upward.

Fig 2: Identifying Fuel Level Sensor Retainer

Courtesy of GENERAL MOTORS CORP.

Slide the fuel level sensor upward until the retainer (1) locks.

Fig 3: Identifying Fuel Level Sensor Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Connect the fuel level sensor electrical connector (1).
Install the fuel sender assembly. Refer to Fuel Tank Fuel Pump Module Replacement .