LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Engine Cooling System) >> Repair Instructions >> Radiator Drain Cock Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain the cooling system. Refer to Cooling System Draining and Filling (L26, LY7 GE 47716 Fill)  or Cooling System Draining and Filling (L26 Static Fill)  or Cooling System Draining and Filling (LY7 Static Fill)  or Cooling System Draining and Filling (LS4 GE47716 Fill)  or Cooling System Draining and Filling (LS4 Static Fill) .
    2. Fig 1: Identifying Drain & Drain Plug
    GM1272787Courtesy of GENERAL MOTORS CORP.
  2. Remove the radiator drain plug by unscrewing counter clockwise and pulling straight out. The seal usually comes out attached to the plug.
  3. Clean the drain and the drain plug.
scientia non olet · About LEMON Manuals