LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Engine Cooling System) >> Repair Instructions >> Coolant Recovery Reservoir Replacement (LS4) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front fender upper diagonal brace. Refer to Front Fender Upper Diagonal Brace Replacement .
    2. Fig 1: View Of Coolant Recovery Reservoir
    GM1524222Courtesy of GENERAL MOTORS CORP.
  2. Reposition the coolant recovery reservoir hose clamp aside at the radiator overflow fitting.
  3. Disconnect the coolant recovery reservoir hose from the radiator overflow hose.
  4. Remove the coolant recovery reservoir nuts from the shock tower studs.
  5. Remove the coolant recovery reservoir from the lower retainer and the shock tower studs.
  6. Drain the coolant from the coolant recovery reservoir into a clean container.
scientia non olet · About LEMON Manuals