LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Engine Cooling System) >> Repair Instructions >> Coolant Heater Replacement (LY7) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Coolant Heater - LY7, KO5
    GM1312571Courtesy of GENERAL MOTORS CORP.
  1. Install the coolant heater.
  2. Connect the coolant heater cord to the coolant heater.
  3. Lower the vehicle.