Installation Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Coolant Air Bleed Pipe & Clamp

Courtesy of GENERAL MOTORS CORP.

Install the clamps onto the coolant air bleed hose, if necessary.
Install the coolant air bleed hose onto the coolant air bleed pipe.
Install the coolant air bleed hose onto the water manifold.
Position the coolant air bleed hose clamp (322) at the water manifold.
Position the coolant air bleed hose clamp (322) at the coolant air bleed pipe (307).
Refill the coolant system. Refer to Cooling System Draining and Filling (L26, LY7 GE 47716 Fill) or Cooling System Draining and Filling (L26 Static Fill) or Cooling System Draining and Filling (LY7 Static Fill) or Cooling System Draining and Filling (LS4 GE47716 Fill) or Cooling System Draining and Filling (LS4 Static Fill) , as necessary.