LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (Engine Exhaust System) >> Repair Instructions >> Exhaust System Insulator, Hanger, Bracket Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Exhaust Pipe Components
    GM892635Courtesy of GENERAL MOTORS CORP.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Support the exhaust system.
  3. Remove the exhaust pipe hanger (3) from the exhaust pipe (2) and the exhaust hanger bracket (1).
    4. Fig 2: View Of Exhaust Pipe Hanger
    GM373046Courtesy of GENERAL MOTORS CORP.
  4. Remove the exhaust pipe hanger from the exhaust pipe and the exhaust hanger bracket.
    5. Fig 3: View Of Exhaust Pipe Rear Hangers
    GM194710Courtesy of GENERAL MOTORS CORP.
  5. Remove the exhaust pipe rear hangers from the muffler and the rear exhaust hanger brackets.
scientia non olet · About LEMON Manuals