LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (Rear Suspension System) >> Repair Instructions >> Trailing Arm Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Exploded View Of Rear Suspension
    GM1210232Courtesy of GENERAL MOTORS CORP.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the bolt (6) and nu (2) from the trailing arm (3) and the knuckle (8).
  3. Remove the nut (4) and bolt (7) from the trailing arm (3) and the trailing arm bracket.
  4. Remove the trailing arm (3) from the vehicle.