Removal Procedure
WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Refer to Brake Fluid Irritant Caution
.
NOTE:
Refer to Brake Fluid Effects on Paint and Electrical Components Notice
.
- Disconnect the electrical connector from the brake fluid level sensor.
- Disconnect the brake pipe fittings from the master cylinder.
Cap the brake pipe fittings and plug the master cylinder outlet ports to prevent brake fluid loss and contamination.
- Remove master cylinder mounting nuts.
- Remove the master cylinder from the vehicle.
- Remove the brake fluid from the master cylinder reservoir.