LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Component Locations & Component Connector End Views) >> Component Connector End Views >> Engine Oil Pressure (EOP) Switch (L26)

Engine Oil Pressure (EOP) Switch (L26)

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Engine Oil Pressure (EOP) Switch (L26) Connector End View
GM516616Courtesy of GENERAL MOTORS CORP.
Engine Oil Pressure (EOP) Switch (L26)

Pin Wire Circuit Function
A 0.35 TN/BK 231 Oil Pressure Switch Signal
B 0.35 BK/WH 451 Ground
C-D - - Not Available
Connector Part Information 
  • OEM: 12065400
  • Service: 12126436
  • Description: 4-Way F Metri-Pack 150 Series Sealed (GN)
Terminal Part Information 
  • Pins: A, B
  • Terminal/Tray: 12048074/2
  • Core/Insulation Crimp: E/1
  • Release Tool/Test Probe: 12094429/J-35616-2A (GY)